512-537-7049 •


The next generation of LED technology

LED Technology with True Daylight and Tungsten Diodes offers versatility for easy operation. On-board programmable controller on many models allows full Color Temperature Control From 3200-5600 Kelvin. Also has presets buttons allow quick change to saved settings.


Cinesoft 1'x 2'

  • Very wide 2700K Tungsten to 6500K Daylight variable range
  • Continuous DMX 512 dimming control 100%-0%; 5 pin XLR In and Out
  • Flicker-free DC driving system suitable for high speed frame rates*
  • Up to 95CRI**
  • Adjustable Yoke capable of hanging in studio or portable stand mount. (Accepts 1/2" mounting hardware)
  • Center mount option
  • On-Board color and dimming control knobs plus two custom preset buttons (Tungsten and Daylight)
  • 3-Year Warranty
  • Max. Power Consumption: 100W < 1A
  • 90-240V AC Input Range
  • 110° Beam Angle
  • Certifications: UL, FCC, and CE

*Tested up to 5600 FPS.
**CRI varies depending upon color temperature settings but will achieve a minimum of 90 CRI.


Cinesoft 1'x 1' DMX

  • The supreme CRI (Ra95) Value realizing a natural daylight (no green spike)
  • Even spread, very soft and clearly bright light quality
  • FND Display on the rear panel for precise and easy control
  • A variety of power source including 12-28VDC or 100-240VAC Adapter (optional)
  • Highly tune-up 100-0% soft linear dimming without color shift or flickering
  • Adjustable coor temperature from 3200K to 5600K (bi_Color model)
  • Intgrated DMX_512 control as well as local manual control
  • 2 Way slide-in rails on front panel for exchanging various accessories
  • Interchangeable V-mount battery adapter plate and power supply mounting bracket
  • Compact and rugged aluminum profile construction

Cinesoft Desk

  • The FL200D, hi CRI (Ra>95) LED light is a compact, portable, soft light source. The color temperature is variable from a cool 5600K to a warm 3200K and the brightness is adjustable from 100% to 10% by each smooth-tuning dial on the back. The FL200D comes with a 180 degree adjustable desktop mount, a ball head and a diffuser.
  • The Polycarbonate diffuser slides into the front filter slot to soften the light output and significantly lower contrast.
  • As a chin light to fill in shadows under the eyes and chin, the fixture is easily mounted to a flat surface like an anchor desk using the desktop mount with two screws. Also, the unit natively has four ¼”-20 thread on each side for mounting and adjusting the light on camera or stand.
  • The FL200D is designed to work in a wide range of operation volts 7.0 Vdc to 24 Vdc and can be powered using a variety of power source such as AC adapters, Sony NPF battery, V-mount battery and more.


Cinesoft Mini

  • The FL200E On-Camera LED Light has a bright 200W-equivalent output and provides full dimming and variable color temperature control. Mount the light on top of your camera for even work, or position it on a light stand for indoor interviews. The FL200E light is also bright enough to be used as a fill light when shooting outdoors.
  • Color temperature is adjustable from tungsten (3200K) to daylight (5600K) and is controlled by a single dial. For controlling brightness, a second dial gives you full dimming control from 0 to 100% output, with no noticeable color shift.
  • The FL200E is designed to operate with a wide range of 7.0-24Vdc and it features a detachable battery plate for powering the light with a Sony NPF-series battery. You can also use a 14.7V V-mount battery with PowerTap output for powering the light via the D-tap cable. The light includes a ¼”-20 ball head, 100-240VAC adapter and slide-in diffusion filter.

Cinesoft Pocket

  • Power: 3.2 W
  • CRI (Color Rendering Index) : 95>
  • Color Temperature: 3200K-5600K
  • Dimming: 0-100%
  • Run Time: 2 hour
  • Battery: Integrated Li-Polymer
  • Input: Micro 5Pin USB 5V 1A
  • Size: 10x5x1.6cm
  • Weight:100g
  • Mount: ¼"-20 thread of Four built-in Magnets on the back

Related Products

Do you like what you see? Yes, let's work together!